Loading... Please wait...

Hover over image to zoom

  • 3dRCparts One Plug wiring harness Loom for Bavarian Demon Cortex
  • Image 2
  • Image 3
  • Image 4
  • Image 5

3dRCparts One Plug wiring harness Loom for Bavarian Demon Cortex

6
$29.95

 Product Description

Finally an economical solution for moving the Bavarian Demon Cortex from one plane to another.

 

3dRCparts is proud to introduce their exclusive one plug wiring harness for the Bavarian Demon Cortex, this essentially allows you to move your Cortex from plane to plane by simply un-plugging and plugging a single wiring loom.

Since gains are stored in your radio, set-up is as simple as going through the stick movement each time you move the Cortex.

all wires are 22awg, about 150mm/6" long

 

 

 

 

 

Bavarian Demon is not included but sold separately

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

Write review

  1. Great cable.

    Posted by Mike on 9th Feb 2016

    Great idea, but sooner or later you will find out that you want to have your
    plane all set with out this trick if you can afford the $$$$ of another gyro.
    If you take only one plane to the field, this will be awusome, since you can set it up at home the night before.


  2. A must have for the Demon.

    Posted by Props on 16th Feb 2015

    I wanted to be able to share my 3 Cortex's with other planes, but also not make it difficult to do so. This harness is the ticket. Simply mount a plywood square in the plane, mount the Cortex to a similar sized plywood square and screw this onto the plywood in the airframe. Now all you have to do is unscrew and then unplug one plug... move it to the next airframe. Since the settings are so easy to do.. this makes it so very simple.


  3. This saved me $300!!!

    Posted by MikePS on 29th Jul 2014

    Using this well made wire loom, I can easily move my cortex from one airframe to another. The whole process takes less then 3 minutes and works great.


  4. Cortex on the cheap for all your planes

    Posted by Bubba on 14th May 2014

    This wiring bundle allows you to cheaply share the cortex with all your airplanes. Just use dual lock Velcro to mount the cortex to each airframe and your are good to go. Don't forget to train the unit after changing airframes. Takes 3 minutes to switch and is like having a 350 dollar unit in all your birds. Thanks for the great product!!!


Current Stock:
6
6

newsletter

Click the button below to add the 3dRCparts One Plug wiring harness Loom for Bavarian Demon Cortex to your wish list.